Mimosa B11

Mimosa B11

Mimosa B11

Mimosa’s B11 backhaul radio is designed for the modern Internet era, adapting instantly to variable upstream and downstream bandwidth requirements at the lowest cost per Mbps in the industry.

Mimosa B11

Mimosa B11

Mimosa’s B11 backhaul radio is designed for the modern Internet era, adapting instantly to variable upstream and downstream bandwidth requirements at the lowest cost per Mbps in the industry.

Fiber to wireless is the future of connectivity, and the B11 is ready for it. Simply add your preferred SFP module and you’ll be lit up with gigabit fiber speeds. If you’re not quite ready for fiber, the B11 also offers a standard Gigabit Power-over-Ethernet connection.

 

[embedyt] https://www.youtube.com/watch?v=ZnBtr1Dg1BQ[/embedyt]

 

 

Performance
Max Throughput Up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY), 750 Mbps IP aggregate running in TDMA-FD mode typically required in ETSI markets
Low Latency < 1 ms
Wireless Protocols TDMA, TDMA-FD
Radio
MIMO & Modulation 4×4:4 MIMO OFDM up to 256QAM
Bandwidth Single or Dual 20/40/80 MHz channels
Frequency Range 10000-11700 MHz restricted by country of operation
Max Output Power 27 dBm
Sensitivity ( MCS 0 ) -87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
Power
Max Power Consumption 30 W
System Power Method 48 V DC 802.3 at compliant power injectors
System Lightning & ESD Protection 6 kV
PoE Power Supply Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection
Physical
Dimensions Height: 260 mm (10.2″) Width: 158 mm (9.6″) Depth: 70 mm (2.8″)
Weight 2 kg (4.5 lbs)
Enclosure Characteristics Outdoor UV stabilized plastic Aluminum mounting panel
Wind Survivability 200 km/h (125 mph)
Wind Loading 9.89 Kg @ 160 km/h (21.8 lbs @ 100 mph)
Mounting Direct mount to compatible antenna
Antenna Connection Direct connect to circular dual polarized antenna
Network Interfaces Single connection ethernet or fiber
Environmental
Outdoor Ingress Protection Rating IP67
Operating Temperature -40°C to +55°C (-40°F to 131°F)
Operating Humidity 5 to 100% condensing
Operating Altitude 4420 m (14500′) maximum
Shock & Vibration ETS 300-019-2-4 class 4M5
Features
Gigabit Ethernet 10/100/1000-BASE-T
Fiber Capable SFP Cage included Radio accepts either copper Ethernet or SFP but does not support simultaneous operation
Dual Protocol Operation 2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM
Management Services Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI
2.4 GHz 802.11b/g/n radio for local management access
Smart Antenna Alignment Hands-Free dedicated 2.4 GHz Wi-Fi management radio
Smart Spectrum Management Active scan monitors/logs ongoing RF interference across channels (no service impact)
Dynamic auto-optimization of channel and bandwidth use
Security 128-bit AES PSK with hardware acceleration
QoS Supports 4 pre-configured QoS levels
GPS Location GNSS-1 (GPS + GLONASS)
Colocation Synchronization 1PPS GPS TX/RX synchronization for colocated co-channel radios Adjustable up/downstream bandwidth ratio
Regulatory + Compliance
Approvals FCC Part 101
RoHS Compliance Yes

 

Reviews

There are no reviews yet.

Be the first to review “Mimosa B11”

Your email address will not be published. Required fields are marked *

Scroll to Top