Ubiquiti Networks UniFi U6 In-Wall

Wall-mounted WiFi 6 access point with a built-in PoE switch.

115 m² (1,250 ft²) coverage

300+ connected devices

WiFi6 (4×4 MIMO)

Powered using PoE*

*PoE+ input required for single port PoE output.

Mechanical
Dimensions 139.66 x 96 x 31.19 mm (5.5 x 3.78 x 1.28″)
Weight 460 g (1.01 lb)
Enclosure materials Plastic, aluminum
Mount material Aluminum
Hardware
Networking interface (1) Data-in: 1GbE RJ45 port
(4) Data-out: 1GbE RJ45 ports
Management interface Ethernet
Bluetooth
PoE interface (1) PoE in (PoE output not used)
(1) PoE out (Requires a PoE+ switch)
Power method PoE
Power supply UniFi PoE switch
48V, 0.5A PoE adapter (Optional)
Max. power consumption Excluding PoE output: 13.5W
Max PoE wattage per port by PSE 15.4W*
*Requires a PoE+ switch
Voltage range PoE mode 44—57V DC
Max. TX power
2.4 GHz
5 GHz
22 dBm
26 dBm
MIMO
2.4 GHz
5 GHz
2 x 2 (UL MU-MIMO)
4 x 4 (DL/UL MU-MIMO)
Throughput rate
2.4 GHz
5 GHz
573.5 Mbps
4.8 Gbps
Antenna gain
2.4 GHz
5 GHz
5 dBi
5.9 dBi
LED White/blue
Button Factory reset
Operating temperature -30 to 60° C (-22 to 140° F)
Operating humidity 5 to 95% noncondensing
Certifications CE, FCC, IC
Software
WiFi standards 802.11a/b/g
WiFi 4/WiFi 5/WiFi 6
Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID 8 per radio
VLAN 802.1Q
Advanced QoS Per-user rate limiting
Guest traffic isolation Supported
Concurrent clients 300+
Zero-wait DFS Yes*
*Supported with upcoming firmware versions.
Supported Data Rates
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 – MCS31, HT 20/40)
802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 – MCS11 NSS1/2/3/4, HE 20/40/80/160)
Application Requirements
UniFi Network Version 6.4.52 and later

Scroll to Top