MikroTik RB2011UiAS-2HnD-IN

MikroTik RB2011UiAS-2HnD-IN

2.4GHz AP, 5x Ethernet, 5x Gigabit Ethernet, SFP cage, USB, LCD, PoE output on Eth10, 600MHz CPU, 128MB RAM

$1.00

MikroTik RB2011UiAS-2HnD-IN

MikroTik RB2011UiAS-2HnD-IN 2.4GHz AP, 5x Ethernet, 5x Gigabit Ethernet, SFP cage, USB, LCD, PoE output on Eth10, 600MHz CPU, 128MB RAM

The RB2011Ui is a low-cost multi-port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring – are just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-2HnD has the most features and interfaces of all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports, and SFP cage (SFP module not included!). Also, it features a powerful dual chain 2.4Ghz (2312-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, USB port, and RouterOS L5 license, as well as a desktop case with power supply, two 4dBi Omni antennas, and LCD panel- all this for only $129!

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D, and S-35/53LC20D (not included)

RouterBOARD 2011UAS-2HnD-IN comes with a desktop enclosure, LCD panel, and power supply.

A Wall mount kit (product code RBWMK) for the network closet is available for purchase as an optional accessory.

The RB2011Ui also has passive PoE output capability on the last port (ETH10), which means you can power another device just by connecting it over a regular Ethernet cable

 

Specifications

Details
Product code RB2011UiAS-2HnD-IN
Architecture MIPSBE
CPU AR9344
CPU core count 1
CPU nominal frequency 600 MHz
Dimensions 214mm x 86mm for PCB
RouterOS license 5
Operating System RouterOS
Size of RAM 128 MB
Storage size 128 MB
Storage type NAND
MTBF Approximately 200’000 hours at 25C
Tested ambient temperature -40°C to 60°C

Wireless capabilities

Details
Wireless 2.4 GHz Max data rate 300 Mbit/s
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 4
Wireless 2.4 GHz chip model AR9344
Wireless 2.4 GHz generation Wi-Fi 4

Ethernet

Details
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 5

Fiber

Details
SFP DDMI Yes
SFP ports 1

Peripherals

Details
Serial console port RJ45
Number of USB ports 1
USB Power Reset Yes
USB slot type USB type A
Max USB current (A) 1

Powering

Details
Number of DC inputs 2 (PoE-IN, DC jack)
DC jack input Voltage 8-30 V
Max power consumption 11 W
Cooling type Passive
PoE in Passive PoE
PoE in input Voltage 8-30 V

PoE-out

Details
PoE-out ports Ether10
PoE out Passive PoE
Max out per port output (input 18-30 V) 510 mA
Max total out (A) 510 mA

Certification & Approvals

Details
Certification CE, FCC, IC, EAC, ROHS
IP IP20

Other

Details
PCB temperature monitor Yes
Voltage Monitor Yes

Wireless specifications

2.4 GHz Transmit (dBm) Receive Sensitivity
1MBit/s 30 -96
11MBit/s 28 -80
6MBit/s 30 -96
54MBit/s 27 -80
MCS0 30 -92
MCS7 25 -73

 

brand

MikroTik

Reviews

There are no reviews yet.

Be the first to review “MikroTik RB2011UiAS-2HnD-IN”

Your email address will not be published. Required fields are marked *

Scroll to Top